產品介紹 | 液壓系統 | SETTIMA / SEIM / PSM / ABER 液壓泵 油壓幫浦 | SETTIMA SMT 系列 螺旋泵 工業泵浦 幫浦 / GR SMT |
SETTIMA SMT 系列 螺旋泵 工業泵浦 幫浦 / GR SMT
主要特色
GR20 - GR23 - GR25 - GR32 - GR40 - GR45 - GR55 - GR60 - GR70 - GR80 - GR90
SETTIMA SMT 系列 螺旋泵 工業泵浦 幫浦 pump
詳細規格
MODELS:
GR20 - GR23 - GR25 - GR32 - GR40 - GR45 - GR55 - GR60 - GR70 - GR80 - GR90
TYPES:
Dry ( SMT ) or submersed ( SMIT )
FLANGES:
ISO 3019/2
CONNECTIONS:
SAE 3000 - BSPP
INSTALLATION POSITION:
Free for SMT - submersed (totally or partially) for SMIT
DRIVE LOADING:
No axial or radial loads
SHAFT ROTATION:
Clockwise (from shaft end) for counter clockwise please contact Settima
SHAFT SPEED:
From 500 to 3.600 rpm (lower than 1.000 and over 1.800 rpm please contact Settima)
FLOWS:
From 4 up to 1.220 L/min
OUTLET PRESSURE:
80 bar continuous – 100 bar intermittent
INLET PRESSURE:
Min. -0.7 bar max. 3 bar (for higher pressure please contact Settima)
FLUIDS:
•HFA oil-water - oil min. 5%
•HFB water-oil emulsion ≥40%
•HFC water/glycol – water max from 35 to 55%
•HFDR phosphate ester
•Lubrication high viscosity oils
Special synthetic fluid: •MIL-H, SKYDROL, others on request
Fuel oil: MGO, MDO, low sulphur MDO anf HFO
VISCOSITY:
From 2 up to 10.000 cSt (les than 20 e over 320 cSt please contact Settima)
SEALS:
NBR, FKM, EPDM (others on request)
ACOUSTIC EMISSIONS:
From 52 up to 68 db(A) at 2.950 rpm
PUMP BODY:
Extruded aluminium alloy
PUMP BODY (special applications):
Cast iron, steel. Hardened steel and inox available on request
SCREW:
Steel for primary screw, cast iron for secondary screws
SCREW (special applications):
Core hardened steel screws, surface treated screws
ENVIRONMENT TEMPERATURE:
From -20° up to +60°C
HYDRAULIC TEMPERATURE:
From -20°C up to +180°C
FILTRATION:
Permissible degree of fluid contamination NAS to 1638 class 8 or ISO DIS 4406 17/14. Recommended filtration β 25 ≥ 75